|
|
|
| Total 36 Products | 1 - 10 |
|
|
Composite Self-lubricating Bearings
Suitable for dry running, low coefficient of friction, lower wear, good sliding characteristics, forming a transfer film can protect the mating metal surface, suitable for rotary and oscillating movement. High chemical resistance, low absorption of w...
 |
|
Sinter bronze bushe
The new material CSB-10HP have been developed for high load with high speed under lubrication. The special resin can support high PV value with lower friction and good wear resistance. The speed can be up to 5m/s, PV up to 60N/m㎡ᥰ...
|
|
PTFE plastic bearing
1. Design for dry and maintenance-free2. Lower friction, excellent wear resistance3. Higher load capacity4. Excellent chemical resistance5. Lower moisture absorption6. Thin wall thickness design, reduce the space and weight7. Can reduced cost when ma...
|
|
Steel backing bronze bushe
1.CSB-80 provides maintenance-free operation2.Operate satisfactorily without lubrication under light duty and low speed3.CSB-80 has a high PV capability under high temperature4.Temperature be allowance from -150℃~＋250℃5...
|
|
Bronze mesh PTFE bearing
1.May work without oil for long perlod2.Extremely high load capacity,good anti-wear and lower friction3.Particularly appropriate for low speed and high load4.Suitable for reciprocating,oscillation or Intermittent motion whereoil film is hard to be fo...
|
|
Metal PTFE bearing
Suitable for rotary and oscillating movement, lower maintenance requirements due to the long re-lubrication intervals, lower wear, lower susceptibility to edge loading, no absorption of water and therefore no swelling, good damping behaviours, good r...
|
|
Wrapped bearing
Steel backed lead bronze lined bearing material for lubricated applications, high load capacity and good fatigue properties, have been widely used in automotive, common industrial like steering gear, power steering, pedal bushes, king-pin bushes, tai...
|
|
Steel bronze powder with PTFE/Pb dry bearing
1. PTFE/Pb mixture 0.01~0.03mm, provides an excellent initial transfer film, which effectively coats the mating surface of the bearing assembly, forming an oxide type solid lubricant film.2. Sintered bronze powder 0.20-0.35mm, provides Max. thermal c...
|
|
Steel bronze powder with PTFE/fibre dry bearings
1. PTFE/fibre mixture 0.01~0.03mm, provides an excellent initial transfer film, which effectively coats the mating surface of the bearing assembly, forming an oxide type solid lubricant film.2. Sintered bronze powder 0.20-0.35mm,provides Max. thermal...
|
|
Bronze backed with bronze powder PTFE/Pb dry beari
1.PTFE/Pb mixture 0.01~0.03mm, provides an excellent initial transfer film, which effectively coats the mating surface of the bearing assembly, forming an oxide type solid lubricant film.2.Sintered bronze powder 0.20-0.35mm, provides max. thermal con...
|
|
Zhejiang Changsheng Sliding Bearings Co., Ltd.
Economic Development Zone
Jiashan City
Zhejiang Province
China
Zip Code: 314100
Tel: +86 573 4184540
Fax: +86 573 4183450
Website:
http://csbbearing.en.supplierlist.com
http://www.csb-bearing.com
|
|
|
